The Story
FastCap 2P-10 Glue Debonder - 55ml (2oz) Pump
Gluing up any project is bound to lead to some over flow or excess glue. In the past if you were using a CA glue, this clean up is a nightmare. FastCap has you covered. 2P-10 Debonder helps you clean up excess 2P-10 that has bonded on the material. Dissolves bond in 5 minutes or less. Not for undoing joints created with 2P-10 glue. This is yet another innovative member of the FastCap 2P10 family.
What is the 2P-10 system?
2P-10 is a two-part ten-second adhesive. Just apply the adhesive, then spray the activator and stick it together for a strong, permanent bond. However this is more than just a 2 part adhesive. FastCap have gone a step further to design a full range of adhesives, applicators and colourants to meet all your rapid adhesive needs. So much more than other CA glues that think they're super.
2P-10 can be used on any material as long as it is clean and the surface is well prepared. The surface should be clean, with no oil, and slightly etched so the glue can bite more effectively. It should not be used in lieu of a weld (on metal), but it is very effective for tacking, to hold a piece in place.
Please note: Picture is of the refill bottle. This listing is for the pump bottle version.
| Variant | 2P-10 Glue Debonder |
| Contents |
|
| QTY | 55mL (2oz) |
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Description
FastCap 2P-10 Glue Debonder - 55ml (2oz) Pump
Gluing up any project is bound to lead to some over flow or excess glue. In the past if you were using a CA glue, this clean up is a nightmare. FastCap has you covered. 2P-10 Debonder helps you clean up excess 2P-10 that has bonded on the material. Dissolves bond in 5 minutes or less. Not for undoing joints created with 2P-10 glue. This is yet another innovative member of the FastCap 2P10 family.
What is the 2P-10 system?
2P-10 is a two-part ten-second adhesive. Just apply the adhesive, then spray the activator and stick it together for a strong, permanent bond. However this is more than just a 2 part adhesive. FastCap have gone a step further to design a full range of adhesives, applicators and colourants to meet all your rapid adhesive needs. So much more than other CA glues that think they're super.
2P-10 can be used on any material as long as it is clean and the surface is well prepared. The surface should be clean, with no oil, and slightly etched so the glue can bite more effectively. It should not be used in lieu of a weld (on metal), but it is very effective for tacking, to hold a piece in place.
Please note: Picture is of the refill bottle. This listing is for the pump bottle version.
| Variant | 2P-10 Glue Debonder |
| Contents |
|
| QTY | 55mL (2oz) |
