Torquata Bottom Cut Straight Plunge Router Bits 1/2in Shank

Torquata Bottom Cut Straight Plunge Router Bits 1/2in shank

Please note. The cutters on both sides do not overlap. This is to allow of clean waste removal when plunging. This means that in a router this will not be an issue. However this may be a problem for CNCs and due to this we do not recommend these bits for CNCs. Please use a Torquata spiral bit for CNC plunge cuts.

These bits offer that improved performance for only a small cost.

Bits 16.0mm diameter and above have a downshear angle for improved chip injection and smooth cut finish.

Straight bits are the most versatile bits and can be used for trenching, grooving, trimming and rebating either hand-held with a guide or in a router table. All Torquata straight bits are twin-fluted for a better-finished edge and long life. 

Product Code	Cutting Diameter Metric	Cutting Diameter Imp'l	Cutting Height Metric	Cutting Height Imp'l	Overall Length
SE-060-H	6.0	15/64in	25.0	N/A	67.0
SE-064-H	6.4	1/4in	25.4	1in	67.9
SE-079-H	7.9	5/16in	25.4	1in	67.9
SE-095-H	9.5	3/8in	25.4	1in	67.9
SE-100-H	10.0	N/A	32.0	N/A	73.0
SE-120-H	12.0	N/A	32.0	N/A	73.0
SE-127-H	12.7	1/2in	31.8	1 1/4in	73.5
SE-127-XH	12.7	1/2in	50.8	2in	88.9
SE-159-H	15.9	5/8in	32.0	N/A	72.9
SE-160-H	16.0	N/A	32.0	N/A	73.0
SE-160-XH	16.0	N/A	51	N/A	67
SE-170-H	17.0	N/A	32.0	N/A	73.0
SE-180-H	18.0	N/A	32.0	N/A	73.0
SE-180-XH	18.0	N/A	51.0	N/A	89.0
SE-190-H	19.0	3/4in	31.8	1 1/4in	73.5
SE-250-H	25.0	N/A	32.0	N/A	73.0
SE-254-H	25.4	1in	31.8	1 1/4in	73.0